sheet metal
Home | Library | Support | Forum Home Page


Go Back   The Sheet Metal Shop > Sheet Metal Forums > Sheet Metal AirCraft

Sheet Metal AirCraft Sheet Metal Discussion Forum for AirCraft. (No Blatant advertising on the forum) Enjoy our extensive library of sheet metal books and articles.


Share This Forum!  
 
 
     

 

Reply
 
Thread Tools Display Modes
  #1  
Old 11-08-2011, 02:16 PM
geraldmorrissey geraldmorrissey is offline
Junior Member
 
Join Date: Nov 2011
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Wing Spars

Hi all, new guy here. I need to bend some 2024 T-3 AL spar webs for my homebuilt project. They are 8"long, about 9" high in the shape of a channel. The flanges are about 1.5" wide with one side bent to 90 degrees and the other at 82 degrees. These webs (I njeed to make 4) need to be bent very accurately to fit the ribs. I live in Seattle and need some advice on how to do this or the name of someone I could employ to do this. Any advice is welcome. I have experience hand forming and lots of experiece riveting but little experience using a 8' brake. Look forwadd to learning from the experts at this site.
Cheers
Gerry
Reply With Quote
  #2  
Old 11-13-2011, 05:48 PM
Rob's Avatar
Rob Rob is offline
 
Join Date: Jun 2008
Location: Ottawa Valley, Eastern Ontario, Canada
Posts: 448
Thanks: 42
Thanked 73 Times in 55 Posts
Default

Can you upload a profile sketch?
I think you can bend them quite accurately on an 8 foot brake.
I could bend up some samples and post the results.
Reply With Quote
Reply
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


 

All times are GMT -6. The time now is 03:11 AM.


Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.